Linksys Switch 5-Port 10/100/1000MBPS - EG005W

Linksys Switch 5-Port 10/100/1000MBPS - EG005W

 

FEATURES- Instant Gigabit Series
       Gigabit 5-Port Workgroup Switch
       Wire-speed switching and Linksys reliability in an 5-Port Gigabit
        desktop switch.
       The Gigabit 5-Port Workgroup Switch provides non-blocking, wire
        speed switching for your 10, 100, and 1000 megabit network clients.
        Drop this switch in place of your current workgroup hub or switch,
        and you can upgrade your high-requirement workstations to full
        Gigabit speeds as necessary, while continuing to service other
        clients at their current speeds. Or build your network from the
        ground up, with appropriate link speeds for each user's
        requirements.
       Apply this switching power to your current hub-based Ethernet
        network, and your data traffic efficiency will improve several
        times over. Connect your Gigabit-equipped workstations to the
        Switch's 10/100/1000 ports for full-duplex, dedicated bandwidth of
        up to 2000Mbps! It's perfect for graphics, multimedia, and other
        applications that have to move large files across the network
        quickly.
       With the Gigabit 5-Port Workgroup Switch, you can connect your
        existing 10/100 Ethernet network to your Gigabit server backbone
        without any additional equipment. All ports are auto-negotiating,
        and have automatic MDI/MDI-X crossover detection, so you don't have
        to worry about the cable type. Address learning and aging is
        supported, as well as 802.3x flow control with head-of-line
        blocking prevention to keep your high-speed clients from bogging
        down in lower-speed traffic.
       The Gigabit 5-Port Workgroup Switch from Linksys is the perfect
        solution for your desktop Gigabit and 10/100 networking needs.
  Includes switch, AC power adapter, registration card and user guide.
* Five 10/100/1000Mbps, half/full duplex, switched ports.
* Forwards and filters packets at non-blocking, full wire speed.
* All ports have auto speed negotiation and auto MDI/MDI-X crossover
   detection.
* Supports address learning and aging, 802.3x flow control and head-of-
   line blocking prevention.
                                                                           
STANDARDs  - IEEE 802.3, 802.3u, 802.3x, 802.3ab
CONNECTORs - ( 5) 10BaseT/100BaseTX/1000BaseT/RJ45 ports                   
CABLE TYPE - Category 5e Recommended
INDICATORs - LEDs for Power, Link/Act, Speed, FDX
APPROVALS  - FCC Class A
REQUIRES   - 200MHz or faster processor, 64MB RAM, Ethernet or Gigabit
              network adapter, Cat5e Ethernet network cable.
POWER- External Power supply 12V DC, 2A
       Input 110V AC Consumption 18W
SIZE - 7.32"w x 1.89"h x 6.06"d              WT.- 1.1 lbs